(800) 624-9043
Facebook Page Twitter Feed Youtube Channel RSS Feed
Made in the USA

Model I Flange Sight Glass

Model I Flange
jQuery Slider
Photo Gallery
View Model I Flange Photos
Model I Flange Photos
View Engineering Information
CAD Drawing

Click for larger view
Product Details
If corrosion resistance is only needed on wetted parts of a sight glass, our Model I Flange sight glass unit is an ideal choice for the application.

The Model I's insert can be made from a wide variety of materials (stainless steel, glass-lined, or Hastelloy, etc) to ensure compatibility with any process fluid, while the main unit body can be made of carbon steel (or any material your application requires). The unit mounts on a standard ANSI B16.5 (2" to 24") flange. As with all PPC products, the Model I Flange can be made to meet any pressure and temperature requirements.

Flange: Carbon Steel SA-105 (Standard); 316 or 304 Stainless Steel SA-182
Insert: 316 or 304 Stainless Steel SA-351; Carbon Steel SA-519; Glassed Lined; Hastelloy; Inconel; Titanium; Monel; Alloy 20; etc.
Compression Ring: 304 Stainless Steel SA-351; Carbon Steel SA-519
Lens: Two-Piece Laminated Tempered Soda Lime (Standard); Tempered or Annealed Borosilicate; Quartz; Lexan; Acrylic; Mica Shields
Lens Cushion Gaskets: TeflonⓇ GrafoilⓇ GylonⓇ Blue-GardⓇ etc.
Lens Packing: Combination TeflonⓇ Impregnated and VitonⓇ (Standard); Graphite; FDA TeflonⓇ etc.
Compression Screws: 18-8 Stainless Steel; Carbon Steel SA-193*

*By request only

This sight glass has been certified as maintaining a Quality Assurance System in accordance with the Pressure Equipment Directive 97/23/EC (PED) Annex I, Paragraph 4.3 by the Certification Body 0036 of the TÜV Industrie Service GmbH.

Parts and Accessories for the Model I Flange
Sight Glass Resources:
Resource Index >
Sight Glass FAQ >
Types of Sight Glasses >
Tech Talks Videos >
Articles and White Papers >

Home Page >

Copyright 2015, All Rights Reserved.
Privacy Policy